There are many different reasons that your computer’s DVD drive may not be reading disks anymore. Whether it’s due to insufficient hard drive space or something else entirely, there’s a good chance that it can be fixed easily for just a few dollars.
Possible Problems and Their Solutions:
1. DVD drive not reading disks:
This problem refers to the drives not reading any disks. If there are no disks in the DVD drive, you can’t read a disk.
A possible cause of this problem is that you have a low amount of free space on your hard drive. To fix this, boot up the computer and check your system’s free disk space. A good rule of thumb is that if there’s less than half an inch of hard drive space left, try deleting some more files to free up some more space.
2. The DVD drive isn’t reading some disks, but others:
If a DVD drive isn’t reading some disks but can read others, the problem will most likely be that there’s dust on the lens, or your computer can’t handle that particular disk.
To fix this problem, you’ll want to go into your computer’s BIOS settings and check to see if any of your BIOS settings are set inappropriately for disc reading. Another way would be to reset your computer’s setting to default.
Also, before cleaning your lens, you should try getting a new one made for a computer instead of a camcorder or other device.
3. The DVD Drive Doesn’t Show Up in My Computer:
If you can’t see your DVD drive, it may have disappeared from your computer. This could be due to some reasons, but the most common is blocked by an antivirus or firewall program.
To fix this, check your computer’s firewall settings and make sure that they’re set appropriately.
Another way to fix this problem is to restart the computer and boot it up after disabling your antivirus or firewall program temporarily. After all of the icons have fully loaded back into the operating system window, re-enable your antivirus or firewall program and reboot again to check whether or not the problem has been fixed.
4. DVD Drive Won’t Eject:
A common problem with DVDs is that the drive may not eject a disk after being inserted and read.
Make sure that the drive will fully open when you press the eject button to fix this problem. If not, check to see if any of your computer’s keys are stuck in or broken off the keyboard.
If this isn’t the cause, try restarting your computer and try again after unplugging all USB devices except for the keyboard and mouse.
Another possible cause is that there is dust on your DVD drive motor or inside, causing it to malfunction. To fix this, clean out the drive using a small can of compressed air or an electric vacuum cleaner.
However, if you can’t see inside your DVD drive, there is a chance that the lens has become damaged and it will need to be replaced with a new one.
5. DVD drive not working at all:
This could mean that the DVD drive isn’t working. If you try and insert a disk in your computer’s DVD drive and nothing happens, you may have a physical problem with the unit. Or you may need to replace it altogether.
To fix this, you’ll want to boot up the computer and check whether or not the drive is receiving power from the motherboard. If it isn’t, then you’ll need to reformat your hard drive’s partition containing the DVD drive.
If you’re facing this problem after having a working disk inside of your CD/DVD drive, then try cleaning out your DVD drive.
Hey! Do You Wanna Buy Best External Blu Ray Drive Then Click Me.
Conclusion:
In conclusion, there are several different ways that your DVD drive may malfunction. However, all of these potential problems can easily be solved with a quick repair for around $5. Always keep an extra DVD in your desk drawer to have one on hand at all times. We never know about these electrical appliances. They can stop working at any moment.
